A chain of custody only holds up if every person who handled the item can show it was not opened along the way. Signatures and timestamps record who had custody; they do not show whether a bag, box or sample container was accessed between two of those signatures. That gap is what tamper-evident seals are for.
What tamper-evident tapes and labels actually do
A tamper-evident seal is a construction designed to separate when it is disturbed, and not to reverse. Lift it, peel it, warm it or slit it, and the layers part in a way that is designed not to be put back: a hidden VOID or OPENED message appears, or the substrate itself tears along the fibre.
It is important to be precise about what that gives you. A seal provides visible evidence that the closure was interfered with. It does not physically lock a container, it does not prove who opened it, and it does not by itself authenticate the contents. Where authentication matters, the evidence comes from the record — a unique serial or code on the seal, logged at dispatch and checked on receipt — not from the adhesive.
Why it strengthens an evidence chain
- A physical verification point. The receiving officer, nurse or analyst has something to inspect, not just a form to sign.
- A unique reference per handover. A numbered or barcoded seal ties the physical item to the register entry. A mismatched number is as informative as a voided seal.
- Deterrence. A visible, numbered seal signals that opening the item will be noticed, which discourages casual or opportunistic access.
- Fewer ambiguous incidents. When a seal is intact and its number matches, a query can be closed quickly instead of triggering an investigation.
Where it is used
- Police and forensic handling: exhibit bags, sealed containers for seized material, storage and transfer between store and laboratory.
- Healthcare: blood and tissue samples, medication totes, crash carts and controlled-drug transfers.
- Laboratories and quality control: retained samples, batch reference material, disputed-product returns.
- Documents and secure transfer: sealed envelopes, pouches and cases where the closure must be shown to be undisturbed.
Related routes: evidence integrity applications and SealSAFE tamper-evident paper bags.
Specifying a seal that will hold up later
Most seal failures in evidence work are specification failures, not product failures. Four things decide whether the seal is still doing its job weeks later:
- Substrate. Kraft exhibit bags, polythene, painted metal lockers and textured polypropylene totes all behave differently. Paper-faced constructions bond into the fibre and tear it on removal; polyester constructions release cleanly and are the right answer on a reusable surface.
- Residue. Choose deliberately. A permanent label leaves a mark and is appropriate on single-use packaging; a non-residue polyester label keeps a reusable tote or case clean. Using a permanent construction on reusable stock creates a cleaning problem that ends with staff not sealing at all.
- Application conditions. Adhesives need pressure and dwell time to reach full bond. A seal pressed on with a fingertip on a cold, damp bag at a scene is not the same seal as one applied firmly indoors. Condensation is the most common cause of a seal that lifts in storage.
- Numbering and the record. Decide before rollout where the number is written down, who checks it, and what happens when it does not match. A seal without a logging step is decoration.
Test the construction on the exact bag, box or tote you use, in the temperature and handling you actually work in, before it goes into a procedure. If you are not sure which construction suits your surface, send us the pack and the problem and we will specify it with you, or discuss your requirement if you already know what you need.
Related reading: tamper evident vs tamper proof.