Industries
Secure Food & Beverage Logistics: Advanced Tamper Evident Solutions
Food and drink moves fast, changes hands often and is consumed on trust. Tamper evidence gives the customer and the auditor a visible answer to one question: has this been opened since it left us?
Used across meal kits, grocery delivery, fast food and takeaway, beverage production and chilled distribution, where a seal must survive condensation, handling and heat and still be obvious when broken.
Know what you need? Talk to our team. Not sure what will work? Send us the application.

The problem
Where food and beverage supply chains are exposed
01
Undetected access
Cartons and bags opened in transit with nothing to show for it.
02
Last-mile delivery
Multi-drop and third party couriers handling open-topped bags and totes.
03
Recall and traceability gaps
No record of whether a pack stayed closed between site and customer.
04
Chilled and frozen conditions
Condensation and cold surfaces defeating standard adhesives.
05
Product substitution
Generic tape and plain labels that anyone can buy and reapply.
06
Slow goods-in checks
Deliveries recounted and reinspected because the seal cannot be trusted.
How it works
What tamper evidence does in food and beverage
Tamper evident labels and tape separate when disturbed, and the change is designed not to reverse, exposing a permanent VOID message. They make interference visible and support verification at handover. They do not sterilise, preserve or guarantee product safety, and they do not replace your food safety controls.
01
Sealed at pack-out
Applied at the end of the line, in the kitchen or at despatch, by hand or on a machine.
02
Survives the journey
Constructions selected for the temperature, moisture and handling the pack actually sees.
03
Checked at handover
Driver, store or consumer can see at a glance whether the pack was opened.



Key applications
Food and beverage security applications
Delivery, recipe kit and beverage applications where the customer must see first opening.

Tamper evident labels for food delivery
Bag and carton seals so the customer can see the order has not been opened in transit.
View solution →
Recipe Box Tamper Evident Tape
Carton tape for meal-kit boxes that shows interference along the seam.
View solution →
Recipe Kit Security
Sealing kit components and chilled contents through the delivery route.
View solution →
Alcohol and Beverage Labels
Closure seals for bottles and cans where substitution or refilling is the concern.
View solution →
Paper tamper evident tape
A paper carton seal for food packs that need to recycle as paper.
View solution →
Something not on this list
If your pack, surface or operation is not covered here, send us the pack and the problem and we will specify it.
Put it through the Security Lab →Still using card or board bag seals? See why paper tamper evident delivery labels beat printed board cases.
Products typically specified
What food and beverage operations usually specify
Delivery and bag seals
Tamper evident labels including fingerlift formats for takeaway and delivery bags. For delivery and click-and-collect orders, SealSafe™ tamper evident delivery bags build the closure into the bag.
Direct thermal labels
Direct thermal / till roll labels for order-level printing at the point of pack.
Recipe kit and box tape
Standard tamper evident tape for meal kit and grocery cartons.
Chilled and frozen
Cold chain constructions for temperature sensitive shipments.
Pallet and depot loads
Pallet secure tape for whole-load evidence between sites.
Paper-based tamper evidence
Paper tamper evidence for food and beverage packaging.
Cartons, bags and delivery packs can be sealed with paper-based tamper evident labels and tapes that give staff and customers visible evidence if a pack has been opened. Constructions are specified around the application and the environment the pack travels through, including chilled and ambient distribution. Food-contact suitability is confirmed per construction rather than assumed, so tell us where the seal sits on the pack. See the full paper tamper evidence range.
- Cartons & bags
- Visible opening evidence
- Application-specific options
Specifying it properly
What we need to know to get it right first time
Surface and pack format
Paper bags, coated board, plastic tubs, film lidding and corrugate all behave differently. A sample of the actual pack is worth more than a specification sheet.
Temperature at application
Hot food, ambient pack-out and chilled despatch are three different adhesive problems. Tell us the surface temperature when the seal goes on, not just where it is stored.
Moisture, grease and handling
Condensation, wash-down, oily surfaces and gloved hands all affect adhesion and legibility. These are the usual reasons a seal fails in service.
Food contact and materials
Seals are specified for the outer pack unless you tell us otherwise. If a construction needs to sit against food or carry specific material declarations, raise it at the sampling stage so it is designed in, not retrofitted.
Next step
Specify it around your operation
Most food and beverage seal failures are surface, temperature or moisture problems rather than label design problems. Send us the pack and the conditions and we will specify it with you.
Known requirement
Samples, pricing, artwork and rollout for a product or application you have already identified.
Not sure what will work
Difficult substrate, temperature, line speed or a loss pattern you cannot pin down. Send us the pack and the problem.
Choose your route
Standard stock products
Stock food security labels and box tapes for containers, bags and cartons. Buy stock products
Larger volumes or distribution
Site or franchise-wide quantities, scheduled call-off and distributor supply. Talk to us about volume
Custom print, colour or a difficult application
Branded print, unusual container shapes, or chilled and hot-fill conditions. Send us the pack
What happens next
- We read it ourselves — a technical person, not a sales queue.
- We test on your actual surface and pack, not a flat panel.
- We tell you what the evidence looks like, then specify the construction.
No obligation, and no need to know the technical answer first.
Or post us the pack
Prefer to send the real thing? Post it to the lab and tell us it is coming through the Security Lab, quoting your reference on or inside the parcel.
The Security Lab TeamTamper Technologies LtdThe OaksMoor Farm Road WestAirfield Industrial EstateAshbourneDerbyshireDE6 1HDUnited KingdomOr talk it through: 01335 300335