• +44 (0) 1335 300335

DR 7344 Covert Red Tamper Evident Security Tape

Red tamper evident security tape — code DR 7344, message Covert void message.

Pulling the tape separates it along the perforations and transfers the void message to the carton, so an opened seal is still visible on arrival.

Full specification, applications and what to check before ordering are set out below.

Tamper Proof Tape DR 7344

Standard Tamper Evident Tape

At a glance

Product family Standard Tamper Evident Tape
Code DR 7344
Construction Permanent self-adhesive film tape, perforated, liner-less
Colour Red
Tamper behaviour Removal changes the seal and reveals the hidden message; it cannot be reapplied looking as it did
Transfer behaviour Full transfer — the void message is transferred to the carton when the tape is pulled
Message Covert void message
Visibility Covert — no security markings on the surface
Removal Transfers adhesive to the surface on removal
Format Continuous roll
Options Custom options available: sequential numbering, custom void message, custom surface print and colour.

Fields are stated only where verified. Supplied format and roll or reel quantity confirmed per order line.

What happens when removed

Pulling the tape separates it along the perforations and transfers the void message to the carton surface. The removed length cannot be reapplied looking as it did, so an opened seal is still visible when the box is received. It makes interference visible after the event — it does not prevent opening.

Typical applications

  • Sealing outer cartons for e-commerce and courier despatch
  • Closing consignments handed between carriers and depots
  • Sealing returns and high-value shipments where opening must be visible

Before you specify

  • Substrate — behaviour differs on smooth film, coated and recycled board, powder-coated metal and low-energy plastics.
  • Temperature and environment — confirm the application and storage range, and any chilled, humid or outdoor exposure.
  • Application area — the seal must bridge the closure and sit flat, not over a fold, seam or embossing.
  • Testing — apply to your own pack and attempt removal before committing to a specification.

Related

Got a packaging security problem? Send us the pack

Tell us the pack, the closure and the environment. We will confirm whether this line is the right one, point you to a better fit if it is not, and test it on your own pack.

You do not need to know which construction you need. Describe the problem and the Security Lab will specify it. Prefer to talk first? Contact the team.

Related products