• +44 (0) 1335 300335

Red Non-Residue Tamper Evident Labels — 220mm x 20mm

Red non-residue tamper evident labels — 220mm x 20mm, message OPENVOID.

Lifting the label reveals the hidden message on the label and peels away cleanly — no void message is transferred, so a reusable surface stays clean, and the spent seal itself is the control in a workflow where issued seals are recorded.

Full specification, applications and what to check before ordering are set out below.

Non Residue Seal
permanent product tamper evident label
Red Non-Residue Tamper Evident Labels — 220mm x 20mm - Image 3

Standard Non-Residue Labels

At a glance

Product family Standard Non-Residue Labels
Construction Non-residue (peelable) self-adhesive film, pressure sensitive
Size 220mm x 20mm
Colour Red
Direction Narrow edge leading (NEL)
Tamper behaviour Removal changes the seal and reveals the hidden message; it cannot be reapplied looking as it did
Transfer behaviour No transfer — no void message is left on the surface, so a reusable pack or tote stays clean
Message OPENVOID
Options Overprinting available: sequential numbers, barcodes, QR codes, wording and one-colour logos.

Fields are stated only where verified. Supplied format and roll or reel quantity confirmed per order line.

What happens when removed

Lifting the label breaks the face layer and reveals the hidden message on the label itself. Nothing is transferred to the surface — the pack, tote or asset is left clean — but the label is spent and cannot be put back looking as it did. Because no message is left behind, the control in a non-residue workflow is the seal itself: the expected unique seal present and matching the record means a normal handover, while a seal missing, changed or not matching is an exception to investigate. Outside a workflow where issued seals are recorded, a missing seal is not by itself evidence of tampering. It makes interference visible after the event — it does not prevent opening.

Typical applications

  • Bridging the closure on large cartons, crates and tote lids
  • Sealing bags and sacks across the full width of the fold
  • Pallet and consignment sealing where the seal must be read at a distance

Before you specify

  • Substrate — behaviour differs on smooth film, coated and recycled board, powder-coated metal and low-energy plastics.
  • Temperature and environment — confirm the application and storage range, and any chilled, humid or outdoor exposure.
  • Application area — the seal must bridge the closure and sit flat, not over a fold, seam or embossing.
  • Testing — apply to your own pack and attempt removal before committing to a specification.

Related

Got a packaging security problem? Send us the pack

Tell us the pack, the closure and the environment. We will confirm whether this line is the right one, point you to a better fit if it is not, and test it on your own pack.

You do not need to know which construction you need. Describe the problem and the Security Lab will specify it. Prefer to talk first? Contact the team.

Related products