Sectores
Soluciones logísticas a prueba de manipulaciones para cadenas de suministro globales seguras
Freight changes hands many times between despatch and delivery. Tamper evident tape and labels give every handover a visible, irreversible record of whether the load was opened on the way.
Used across distribution centres, third party logistics, groupage, parcel and multi-drop operations to shorten goods-in checks, support claims and deter opportunist access.
The problem
Where logistics loads are exposed
Loss rarely happens in one place. It happens at the points where a load is unobserved, unsealed or unchecked, and where nobody can prove which leg of the journey it happened on.
01
Unattended dwell time
Loads sitting in yards, cross-dock lanes and consolidation bays between legs.
02
Multiple handovers
Every transfer between carrier, hub and driver adds a point where responsibility becomes unclear.
03
Unverifiable claims
Shortages reported at delivery with no evidence of where the carton was opened.
04
Re-sealed cartons
Plain packing tape can be cut and re-laid so a carton looks untouched.
05
Slow goods-in checks
Receiving teams opening and recounting stock because the seal cannot be trusted.
06
Customs and compliance
Cleared freight that must demonstrate it stayed closed after inspection.
How it works
What a sealed load actually does
Tamper evident tape and labels are separating constructions. Once applied, any attempt to open, peel back or re-seal splits the layers and exposes a permanent VOID message. They deter and reveal interference; they are not a physical barrier.
01
Sealed at despatch
Applied by hand, dispenser or automatic case sealer as the load leaves the line.
02
Carried through the chain
Optional numbering, barcodes or QR codes tie the seal to the consignment, route or driver.
03
Checked on arrival
Accept, quarantine or reject in seconds without tools or a full recount.
Key applications
Logistics security applications
Where loads, cartons and returnable assets are sealed across a route.
Shipping Container Labels
Seals on container doors and fittings to evidence access between port and depot.
View solution →
Tote Box Security
Numbered seals for returnable totes that release cleanly and keep the tote in circulation.
View solution →
Etiquetas de seguridad para vehículos y furgonetas
Door, shutter and compartment seals so multi-drop access can be checked.
View solution →
Envelope and Postal Labels
Paper seals for envelopes and mailers carrying documents or small high-value items.
View solution →
Tape for Automated Case Sealers
Tamper evident tape specified to run through case sealers and packing machines.
View solution →
Pallet security tape
Sealing stretch-wrapped pallets so a broken load is obvious at receipt.
View solution →
Something not on this list
If your pack, surface or operation is not covered here, send us the pack and the problem and we will specify it.
Put it through the Security Lab →Products typically specified
What logistics operations usually specify
Carton and case tape
Standard tamper evident tape for outbound carton sealing.
Tote box seals
Tote box security for returnable transit packaging.
Paper and recyclable routes
Paper tamper evident tape where a single material carton is the objective.
Getting it right
Practical points before you roll out
Match the construction to the surface
Corrugated board, plastic totes, stretch wrap and shrink film all behave differently. Total transfer constructions leave the message on the carton, non transfer options leave the surface clean. Test on your actual packaging before committing to volume.
Decide where the seal is applied
Hand, dispenser, semi automatic or automatic case sealer. Application point drives roll format, core size and web width, and whether numbering can be captured at the same station as the despatch scan.
Write the check into the SOP
Tamper evidence only pays back if goods-in knows what to do when a seal is voided. Surface printed instructions, site codes and multi-language wording make the procedure obvious to everyone in the chain.
Plan for temperature and environment
Chilled despatch, condensation, dusty yards and outdoor storage all affect adhesion. Cold chain loads normally need a construction validated at the temperature the seal is applied at, not just stored at. See cold chain.
Next step
Specify it around your operation
Logistics losses are rarely solved by the tape alone. They are solved by matching construction, surface, application point and the goods-in procedure to the way your freight actually moves.
Samples, pricing and rollout
Tell us the load types, volumes and sites and we will send samples and a quotation for the constructions that fit.
Send us the problem
Difficult surface, temperature, line speed or a loss pattern you cannot pin down? Put the application through the Security Lab.